
双组份打胶机的构造原理
时间:2019-01-10 来源://m.qianyantong-e.com/ 发布人:昌盛机械
双组份打胶机的构造原理
The Construction Principle of Two-Component Gluing Machine
1.由于双组份密封胶的固化需求一定工夫,因而,已涂了双组份密封胶的玻璃应程度悄悄搬动。
1. Because of the curing requirement of the two-component sealant, the glass coated with the two-component sealant should be moved quietly.
2.A组、B组份胶应坚持清洁,严防异物进入胶中。
2. Group A and B glue should be kept clean and foreign bodies should be strictly prevented from entering the glue.
3.在延续任务进程中,胶枪每次中止任务工夫普通不得超越20分钟,否则,使用A组份胶冲出全部混合胶,直至单一的A组份胶从枪口排出爲止。
3. In the process of continuing the task, the time for each suspension of the rubber gun should not exceed 20 minutes. Otherwise, use the A-component glue to punch out the whole mixture until a single A-component glue is discharged from the muzzle of the gun.

4.高压胶管不得强行挤压、弯曲,避免影响零碎正常任务。
4. High-pressure rubber hose shall not be forced to extrude or bend, so as to avoid affecting fragmentary normal tasks.
5.混胶器应常常坚持疏通,以保证良好的出胶效果。如遇梗塞状况,可用丙酮浸泡后清洗。建议每5组清洗一次。
5. Mixers should always be dredged in order to ensure a good gumming effect. In case of infarction, it can be washed after soaking in acetone. It is recommended to clean every 5 groups.
6.当胶枪长工夫不必时(超越一周),应拆下枪体运用溶剂将胶枪和混胶器内的残留胶体清洗洁净。
6. When the glue gun is unnecessary for a long time (more than a week), the gun body should be removed and the residual colloid in the glue gun and mixer should be cleaned by solvent.
7.不同双组份胶消费厂家所消费的胶内含杂质数量不同,依据实践状况明晰B组分的过滤网及单向止回阀,建议每两组清洗一次。
7. The amount of impurities in the rubber consumed by different two-component rubber manufacturers is different. According to the practice, it is recommended that the filter screen and check valve of component B be cleaned once for each two groups.
8.任何因胶体固化所形成的胶枪、管路或零件的毛病,一概不在保修范围之内。
8. Any defects of rubber guns, pipes or parts formed by gel solidification are not covered by warranty.
9.活期给各泵的加油口加油,应保证油雾器内不时油。
9. To refuel the refuelling ports of pumps on demand, it is necessary to ensure that the oil mist is refuelled from time to time.
本文由济南昌盛机械//m.qianyantong-e.com提供整理,想了解更多双组份打胶机知识,欢迎关注我们,谢谢!!
This article is provided by Jinan Changsheng Machinery //m.qianyantong-e.com. Want to know more about two-component glue machine. Welcome to pay attention to us, thank you!!
- 丁基胶涂布机选不对=白耗胶+常返工,昌盛机型实测,47m/min高效省本 2026/04/24
- 中空玻璃封胶不合格=返工亏大钱,中空玻璃加工设备核心解析,精准避坑 2026/04/22
- 全自动中空玻璃生产线仅需3-4人,省人高效,玻璃企业降本必看 2026/04/20
- 避坑!中空玻璃加工设备选不对,60%产能浪费+品质不达标,看完少走弯路 2026/04/13
- 中空玻璃加工设备升级,4大核心革新,解决清洗刮伤、干燥不彻底8大痛点 2026/04/08
- 中空玻璃生产线避坑!传送带3大核心优势,零划痕+高平稳,产能提升35%不返工 2026/04/07
- 中空玻璃生产线:清洗段全面升级,娇贵玻璃清洗接近零损伤 2026/04/06
- 中空玻璃加工设备革新:一体钣金框架告别焊接,稳到零偏差,次品率直降 2026/03/27
- 丁基胶涂布机:中空玻璃氩气锁鲜关键!实测底部99.9%,边缘95.6%全达标 2026/03/26
- 山东玻璃厂必看!大小片中空玻璃全自动封胶线,告别残胶返工,打胶零瑕疵 2026/03/26

当前位置:



产品分类Product categories
联系我们Contact us
