
双组份打胶机突然失效的原因是什么?
时间:2019-08-19 来源://m.qianyantong-e.com/ 发布人:昌盛机械
作为双组份打胶机的厂家,小编很想给大家讲解一些关于这方面的一些小知识和常识。让大家增添更多的知识。今天小编就给大家讲一下双组份打胶机突然失效的原因。
As a manufacturer of two-component glue machine, Xiaobian would like to give you some knowledge and common sense about this. Let us add more knowledge. Today, Xiaobian will tell you the reason why the two-component glue machine suddenly failed.
双组份打胶机失效的主要原因有两个:其一是由于空气层中露点上升。当外界环境温度降低到是玻璃表面的温度低于空气层中的气体露点时,空气层内的水汽便在玻璃表面结成霜或者结成冰露。由于玻璃内表面的结露或结霜`将会严重影响中空玻璃的透视性。并降低中空玻璃的隔热效果,同时长时间的结露会使玻璃的内表面发生霉变或析碱,产生白斑。
There are two main reasons for the failure of the two-component glue beater: one is the rise of dew point in the air layer. When the temperature of the external environment is lower than the dew point of the gas in the air layer, the water vapor in the air layer frosts or dews on the glass surface. Because the dew or frost on the inner surface of glass will seriously affect the perspective of hollow glass. And reduce the insulating effect of hollow glass, while a long time of condensation will cause mildew or alkali evolution on the inner surface of the glass, resulting in white spots.

二是中空玻璃的炸裂`当中空玻璃在安装、使用中由于安装不当、环境温度变化、日照及风压的作用使玻璃发生炸裂。玻璃破裂后(即使极小的裂缝存在)就会失去其密封性`在空气内出现结露、结霜从而丧失使用功能。
The second is the cracking of hollow glass `In the installation and use of hollow glass, due to improper installation, environmental temperature changes, the role of sunshine and wind pressure caused the glass to burst. After the glass breaks (even if very small cracks exist), it will lose its sealing `dew and frost in the air, thus losing its use function.
我们曾对使用两年后的中空玻璃失效情况进行了调查’失效率为3-5%。从上述中我们应该得出以下结论,失效原因中比例比较大的是露点上升(中空层内结露)其次是玻璃炸裂。
We have investigated the failure of hollow glass after two years'use and the failure rate is 3-5%. From the above, we should draw the following conclusion: the dew point rise (dew in the hollow layer) is the major cause of failure, followed by glass bursting.
好了,今天的精彩内容就先给大家介绍到这里了!双组份打胶机的小编会定期为大家整理发布一些行业信息,欢迎大家收藏我们的网站://m.qianyantong-e.com
Well, today's wonderful content will be introduced to you here first! The small edition meeting of two-component glue punch regularly organizes and publishes some industry information for you. Welcome to collect our website: //m.qianyantong-e.com.
- 丁基胶涂布机选不对=白耗胶+常返工,昌盛机型实测,47m/min高效省本 2026/04/24
- 中空玻璃封胶不合格=返工亏大钱,中空玻璃加工设备核心解析,精准避坑 2026/04/22
- 全自动中空玻璃生产线仅需3-4人,省人高效,玻璃企业降本必看 2026/04/20
- 避坑!中空玻璃加工设备选不对,60%产能浪费+品质不达标,看完少走弯路 2026/04/13
- 中空玻璃加工设备升级,4大核心革新,解决清洗刮伤、干燥不彻底8大痛点 2026/04/08
- 中空玻璃生产线避坑!传送带3大核心优势,零划痕+高平稳,产能提升35%不返工 2026/04/07
- 中空玻璃生产线:清洗段全面升级,娇贵玻璃清洗接近零损伤 2026/04/06
- 中空玻璃加工设备革新:一体钣金框架告别焊接,稳到零偏差,次品率直降 2026/03/27
- 丁基胶涂布机:中空玻璃氩气锁鲜关键!实测底部99.9%,边缘95.6%全达标 2026/03/26
- 山东玻璃厂必看!大小片中空玻璃全自动封胶线,告别残胶返工,打胶零瑕疵 2026/03/26

当前位置:



产品分类Product categories
联系我们Contact us
