双组份打胶机的清洗是非常重要的，以避免以下情况:
　　The cleaning of the two-component dispenser is very important to avoid the following situations:
　　避免出现胶
　　Avoid glue
　　第二个问题是胶水
　　The second problem is glue
　　第三，压力跟不上问题
　　Third, the pressure can't keep up with the problem
　　中空玻璃上胶机分为自动双组分上胶机和半自动双组分上胶机，两种设备的清洗方法基本相同。中空玻璃上胶机使用后必须清洗干净。如果不及时清理，双组份胶水会在胶管和上胶机上固化，影响以后的正常使用。
　　Hollow glass gluing machine is divided into automatic two-component gluing machine and semi-automatic two-component gluing machine. The cleaning methods of the two equipment are basically the same. The insulating glass gluing machine must be cleaned after use. If not cleaned in time, the two-component glue will solidify on the rubber tube and the gluer, which will affect the normal use in the future.
　　涂胶机的清洗按下次使用的间隔时间分为两种清洗方式，一种是每天的清洗是每班结束后的清洗工作。还有一次彻底的清洗，主要是设备准备清空，在此使用到下次使用的时间间隔比较长。这两种清洁方法不一样。

　　The cleaning of the glue applicator can be divided into two cleaning methods according to the next use interval. One is that the cleaning every day is the cleaning work after each shift. There is also a thorough cleaning, mainly the equipment is ready to be emptied, and the time interval between this use and the next use is relatively long. The two cleaning methods are different.
　　转变完成后,关闭乙烯输送管和压力开关,继续输出白胶,直到没有释放的黑色橡胶,然后关闭白色橡胶压力开关,关闭白色橡胶输送开关,完成后清洁完成转变。
　　After the transformation, close the ethylene delivery pipe and pressure switch, continue to output white rubber until there is no released black rubber, then close the white rubber pressure switch, close the white rubber delivery switch, and clean the transformation after completion.
　　很长时间(超过15天),设备需要空:生产任务完成后,关闭后压力开关和转换开关,把胶枪和煤油清洗,去除管道输送胶,使用空气压缩机的高压空气吹管道内的胶干净。
　　For a long time (more than 15 days), the equipment needs to be empty: after the completion of the production task, turn off the pressure switch and transfer switch, clean the glue gun and kerosene, remove the pipe conveying glue, and use the high-pressure air of the air compressor to blow the glue in the pipe clean.
　　以上就是双组份打胶机对中空玻璃上胶机清洗要求的详细介绍，想要了解更多，欢迎访问官网//m.qianyantong-e.com
　　The above is a detailed introduction to the cleaning requirements of the two-component gluer for the insulating glass gluer. To learn more, please visit the official website //m.qianyantong-e.com