双组份涂胶机由A、B胶泵、气动系统、提升机构、机架组成。以下是:
　　The two-component glue applicator consists of a and B glue pumps, pneumatic system, lifting mechanism and frame. The following are:
　　1. 胶泵:
　　1. glue pump:
　　(1) A、B部件分别装有橡胶泵，橡胶泵由A、B两部件各自的气动马达驱动，往复运动，分别吸进、压出橡胶。A、B胶泵分别与压胶盘固定在一起，再与机架连接形成各自的系统。
　　(1) Parts A and B are respectively equipped with rubber pumps, which are driven by the respective pneumatic motors of parts A and B, which move back and forth to respectively suction and discharge rubber. A. B glue pump is respectively fixed with the pressure glue disk, and then connected with the frame to form their own system.
　　(2) A、B组份比例通过比例杠杆调节:B组份比例向内调节胶量减少，向外调节胶量增加。通过调节比例杆来控制B胶的出胶量，从而控制A胶和B胶的比例。
　　(2) The proportion of component A and component B is adjusted by the proportion lever: the amount of glue of component B is decreased inwards and increased outwards. By adjusting the proportion bar, the glue output of B glue is controlled, so as to control the proportion of a glue and B glue.

　　(3)出胶量:由气源处理器控制，逆时针调节出胶量增加，顺时针调节出胶量减少。(这里是指总胶量)
　　(3) Glue output: controlled by the air source processor, adjust the glue output anticlockwise to increase, and adjust the glue output clockwise to decrease. (here refers to the total glue quantity)
　　该胶泵通过比例杠杆调节A、B胶的体积比，具有操作灵活、性能稳定、调节范围大等特点。
　　The rubber pump can adjust the volume ratio of a and B rubber through the proportional lever, which has the characteristics of flexible operation, stable performance and large adjustment range.
　　2. 提升机制:
　　2. Promotion mechanism:
　　组件A和组件B胶泵分别设有一套气动升降机构，该气动升降机构由两个气缸并联组成，通过横梁与各自的泵体固定。其目的之一是通过压力板将两个圆柱体的力作用在胶粘表面上。第二，当需要更换橡皮桶时，气缸可以抬起压力板。把鼓留下，换一个新的。
　　The rubber pump of component A and component B are respectively provided with a set of pneumatic lifting mechanism, which is composed of two cylinders in parallel, and is fixed with the respective pump body through the crossbeam. One of its purposes is to apply the force of two cylinders on the adhesive surface through a pressure plate. Second, when the rubber bucket needs to be replaced, the cylinder can lift the pressure plate. Leave the drum and replace it with a new one.
　　以上就是对双组份打胶机的结构运作原理的详细介绍，想要了解更多请点击官网//m.qianyantong-e.com
　　The above is a detailed introduction to the structure and operation principle of the two-component dispenser. For more information, please click //m.qianyantong-e.com